Molybdenum Nitride powder (MoN Powder)
Princeton Powder is a wholesale supplier of pure superconducting molybdenum nitride fine powder, offering microns and nano powder per customer’s request. Our molybdenum nitride refractory powder, with low oxygen level, is used in various applications, including molybdenum nitride film/coating, and molybdenum nitride crystals.
We provide a wide range of molybdenum refractory powders including molybdenum carbide powder, molybdenum sulfide Powder, and Molybdenum Disilicide Powder.
Formula | Molybdenum Nitride |
CAS Number | 12033-19-1 |
Purity | 99.9% / 99.99% |
Synonyms | Molybdenum Nitride nano powder, Molybdenum Nitride refractory powders, Molybdenum Nitride thermal spray powder, Molybdenum Nitride microns powder |
Particle Sizes | 1-3 um or be customized |
Appearance | Black Color |
Melting Point | 1750 °C |
Boiling Point: | N/A |
Density | 9.26 g/cm³ |
| MOQ | 1 kg |
Description of Molybdenum Nitride powder
Pure Molybdenum Nitride (MoN) powder were prepared from pure molybdenum powders in ammonia atmosphere at room temperature by high-energy ball milling. The structure and the particle size of the high melting powders are very important factors in their application. Superconducting Molybdenum Nitride powder a grayish-black, hard material with excellent thermal stability and corrosion resistance. It typically has a cubic crystal structure. MoN is widely used as a catalyst, particularly in ammonia synthesis and hydrogen evolution reactions. Its hardness and wear resistance make it ideal for coatings on cutting tools and wear parts.
Chemical Composition of Molybdenum Nitride powder
Product | Purity (%) | Particle D50 (μm) | Impurity (ppm) | ||||||
Fe | Si | Al | Cu | C | S | P | |||
MoN-1 | 99.99 | 0.05-0.1 | 26 | 16 | 10 | 6 | 9 | 10 | 6 |
MoN-2 | 99.9 | 2-3 | 110 | 105 | 85 | 23 | 110 | 18 | 20 |
Particle Size distribution
0-15 μm, -325 mesh, and nanometer particle size (Various particle sizes can be customized)
Application
Electrochemical capacitors
Catalytic
Material coating/fim
Reference
Study on the Preparation of Ultramicro Molybdenum Nitride Powder and Wear Properties of Its Coating
- Using the specially designed mechanochemical ball-mill equipment, the ultramicro molybdenum nitride powders were prepared from pure molybdenum powders in ammonia atmosphere at room temperature by high-energy ball milling. The results show that the mass ratio of grinding media to powder was 4:1 and after milling for 30 h, the Mo2N of fcc structure was obtained, and the average particle size of powders was around 100 nm. It is found that the chemisorption of ammonia onto the fresh molybdenum surfaces created by milling was the predominant process during solid gas reaction, and the change of Mo electronic undersaturation induced by the grain refining also accelerated the bonding between Mo and N.